2800mm High Domestic Standard Roller Door - Door Supply
2800mm High Roller Door for Domestic Use - Standard Quality
2800mm High Roller Door for Domestic Use - Standard Quality
2800mm High Roller Door for Domestic Use - Standard Quality
2800mm High Roller Door for Domestic Use - Standard Quality
2800mm High Roller Door for Domestic Use - Standard Quality
Roll over image to zoom in Click on image to zoom
2800mm High Domestic Standard Roller Door - Door Supply2800mm High Roller Door for Domestic Use - Standard Quality2800mm High Roller Door for Domestic Use - Standard Quality2800mm High Roller Door for Domestic Use - Standard Quality2800mm High Roller Door for Domestic Use - Standard Quality2800mm High Roller Door for Domestic Use - Standard Quality

2800mm High Roller Door | Ideal for Caravans & Boats | DIY | Door Supply

Save $324.00
Taurean Doors
Door Width = Opening Width + 50mm, Round Up To The Next Door Size. This selects the price band only, Then Enter Exact Door Width Below): 2550
Price:
$1,191.00 $1,515.00

Description

Before specifying, investigate prevailing wind direction and expected maximum velocities at site. Read about the Construction Code Changes here

Windlock Doors - Taurean Doors Systems certify that this door meets the ultimate wind pressure ratings of Australian Standard AS/NZS 4505 and is fit for purpose in Regions A and B (non-cyclonic areas) of Australia when installed according to instructions.

WindStrong Doors - For Region C and D, please refer to this brochure for design information - Windstrong Design Specs

Note: Wind Locked and Wind Strong Doors are not provided with fasteners for the Brackets and Guides. Please refer to your building designer for the fastener specification and to ensure you source the correct screws. Fasteners in the parts boxes are standard doors and are not rated for Wind Lock or Wind Strong doors.

Installing a roller door yourself is a rewarding project that can save you hundreds of dollars. 

But are garage doors hard to install on your own? The short answer: not if you have the right tools, a mate to give you a hand, and guidance. That’s why we’ve put together this comprehensive garage shed roller door installation guide full of step-by-step instructions, tips, and videos.

Quick-Navigation Menu

Safety requirements

Before you start your roller door installation, check the following:

  • All supporting walls are structurally sound to avoid damage.
  • You have the correct fasteners for your structure.
  • You have adequate space above the doorway to house the rolled-up garage door and fittings.
  • The surface above the doorway is flush and free from any protrusions.
  • You have sufficient room on each side of the doorway for the tracks.
  • Your work area is clear of obstructions.
  • You wear appropriate safety gear—gloves, boots, and safety goggles.

Tools you’ll need

Your checklist for garage door installation should include the following materials:

  • Two-step ladders
  • A laser level
  • A spirit level
  • Screwdrivers and a pipe wrench
  • A power drill and drill bits
  • A softwood chock about 400mm long
  • A socket set
  • A tape measure and a Stanley knife
  • A marker pen or pencil

How to prepare

  • Clear the area: Remove vehicles and stored items.
  • Check power access: Ensure outlet availability for motorised doors.
  • Inspect the opening: Verify measurements and structural integrity.
  • Gather tools: Have everything ready before starting.
  • Review instructions: Read through the entire installation guide first.
  • Arrange help: Have an assistant available for lifting.

Pre-installation tips

When your roller door arrives, inspect each component against the installation checklist. Keep the protective strapping around your door intact until installation. Review the installation instructions specific to your door and ensure your workspace is clear of obstructions before you begin.

What is supplied

Each Door comes with guides (tracks) and a parts box.  To see what is in the box click here

If you order a lock this is usually clipped to the end of the door roll.

Downloadable installation instructions:

Taurean Doors

B&D Doors

How to install a roller door

Step 1: Install the brackets and mount the door

  1. Mark bracket positions: Measure the roller door width and mark it on each wall, adding the extra width required (as noted on your model’s installation instructions).
  2. Check clearances: Ensure there’s enough headroom and side space for installation.
  3. Mount the first bracket: Hold it in place, mark the holes, drill, and bolt securely (weld if attaching to steel framework).
  4. Level and mount the second bracket: Use a laser level to align and install the bracket on the opposite wall.
  5. Lift the rolled-up door: With assistance and safe lifting methods (ropes, etc.), raise the door and rest it on the brackets.
  6. Fit the axle: Slide the axle into the bracket slots with the door facing forward to roll down the front.
  7. Secure loosely: Attach U-bolts and saddles, then centre the door in the opening.
    Rotate the curtain: Turn the door so the bottom edge ends up inside the garage.

Step 2: Set spring tension

  • Attach axle: Secure the axle to the brackets using washers and nuts.
  • Apply spring tension: Rotate the door forward as specified in your manual (turn count depends on door size).
  • Cut the strapping: Have your mate cut the straps while you maintain spring tension.
  • Lower curtain and secure: Gently pull the curtain down and place a wooden chock to hold it until the tracks are installed.
  • Test the door: Repeat the process if needed.

Step 3: Install the tracks

  1. Check alignment: Pull the door down, ensuring an even overlap on both sides of the opening.
  2. Fit the first track: Slide the first track onto the curtain edge and loosely fasten it to the wall.
  3. Repeat on the other side: Use a spirit level to ensure both tracks are perfectly vertical.
  4. Test door movement: Slide the door up and down to check tension and track clearance. Adjust if needed.
  5. Secure tracks: Once satisfied, tighten all fasteners.
  6. Attach handle and weight bar: Fit the external handle and, if included, the weight bar to the bottom rail for added stability.

How to install a roller door opener

Installing roller door motors doesn’t involve any electrical wiring (as long as you already have a power outlet near your door), so they’re easy to install yourself.

  1. Check door balance: Ensure your roller door operates smoothly manually first.
  2. Mount the motor: Install above the door centre using the provided brackets.
  3. Attach drive shaft: Connect the drive shaft to the motor and adjust to the correct length.
  4. Install safety sensors: Position safety sensors on both sides of the opening, properly aligned.
  5. Plug in the system: Connect the motor, sensors, and controls per the manufacturer's diagram.
  6. Program settings: Set travel limits, force settings, and remote controls.
  7. Test thoroughly: Run multiple cycles and verify that the safety sensors work.

Always follow your specific door’s installation instructions. We also recommend hiring a professional garage door installer as a safety precaution and for peace of mind.

Post-installation maintenance

Modern garage doors need minimal routine maintenance, but we recommend you follow this six-monthly checklist to keep things running smoothly.

General cleaning and inspection

  • Wipe down the door curtain using a soft cloth or sponge with mild detergent and warm water.
  • Rinse immediately with clean water to avoid residue buildup.
  • Inspect the brackets, springs, tracks, fasteners, cables, and weather seal for signs of wear or damage.

Lubrication tips

  • Apply grease or oil to the springs to keep them operating quietly.
  • Avoid lubricating the locking mechanism, as that may cause it to malfunction.
  • Don’t oil the tracks. Instead, clean them occasionally using a spirit-based cleaner.

Door balance test

Check the spring tension by performing a simple balance test:

  • Close the door.
  • Lift it to waist height.
  • If the door stays in place, the spring tension is correct. If it moves, you may need to rebalance the spring.

Re-tensioning the spring

Spring maintenance can be dangerous. Garage door springs are under high tension and can cause serious injury if mishandled. If you're unsure, we recommend consulting professional services. Only proceed if you are confident in your ability and have assistance.

  1. Tie ropes around each end of the door roll to secure it.
  2. Both you and your assistant should be on ladders at each end of the door.
  3. Grip the axle firmly using a large pipe wrench.
  4. Loosen the U-bolt nuts at both ends while maintaining grip on the wrench.
  5. Rotate the axle clockwise to increase tension and anticlockwise to reduce it.
  6. Re-tighten the U-bolts and carefully release the pipe wrench.

Coning

Does your roller door roll up out of line and the layers start to shape like a cone - this video will help explain why and what to do to fix, it is a simple job and could save you a considerable call out fee.

Video installation guides: How to install roller garage doors yourself

Follow these video instructions carefully to safely install your new garage door.

Taurean doors

B&D doors

Windlock doors


While this installation guide features a Centurion Door, it shows proper Windlock fitting techniques that apply across brands. Focus on the lifting and Windlock attachment methods—these will help ensure your installation goes smoothly, regardless of your specific model.

Chain-operated doors 


This boat shed installation shows the basics of installing a chain-operated roller door, including proper chain routing and tension adjustment for any chain-operated door setup.

Frequently asked questions

How much does it cost to install a garage roller door?

Hiring a professional garage door installer typically costs $250 to $450, depending on door size, location, travel time, and whether an existing door needs removal. DIY installation saves this entire cost, making it an attractive option for handy homeowners.

Are garage doors easy to install?

Roller doors are moderately easy to install for those with basic DIY skills. The process is straightforward with the proper door installation instructions. Most DIYers complete the installation in 90-120 minutes.

How long does it take to install a roller door?

Professional installation can take around 45-60 minutes, while DIY installation takes around 90-120 minutes. Installing a motor usually adds 30-45 minutes to this time.

Can you insulate a garage door after installation?

Yes! You can insulate most roller doors using garage door insulation products, such as reflective foil insulation.

  1. Clean your door: Wipe down your garage door interior with a rag and methylated spirits.
  2. Measure and cut: Carefully measure and cut the insulation to fit your door panels.
  3. Secure properly: Use silicone adhesive to attach the insulation to your door.

Ready to start your garage roller door installation?

Door Supply offers a complete range of quality roller doors that are perfect for DIY projects. View our range of quality roller doors, sectional doors, and commercial shutters. Contact us for more information or to request a quote today.

Buying and Selection

Yes, all doors are made to order to exact size. They are priced in size breaks, so all doors from 2551mm to 2800mm wide door size are sold at the 2800mm price. Just enter your specific dor size in the Text box provided.

All doors are made with the same .40mm Colorbond material from Bluescope. Doors are made from steel that is the same thickness as most roof materials but the steel is softer, (has a lower tensile rating) so it can flex and roll up and down as required without spliting.
For roof's there are higher grade coatings available, to be used in coastal areas, these are not available for garage Doors.
However, regular washing, especially in the areas that do not get rain washed will prolong the life of your door. Keep an eye on the area just under the lintel and on roller doors the top of the roll - roll the door up ~200mm and wash the top of the roll that is now visiable on the inside of the garage.

Sectional Garage Doors

  • Design: Made of horizontal panels that slide up and overhead when opening.
  • Pros: Space-saving inside and outside the garage.
    Excellent insulation options, ideal for energy efficiency.
    High security due to robust construction.
    Smooth operation with automated openers.

    Cons: Slightly higher cost than tilt doors.
    Usually requires professional installation or competnent DIYer's for best performance.

    Best For: Homeowners wanting modern appearance, insulation, and security, especially for attached garages.

2. Tilt Garage Doors

  • Design: Single solid panel that tilts outward and lifts upward.
  • Pros:Simple and cost-effective design.
    Durable and relatively low maintenance.
    Easy to operate manually.
  • Cons:
    Requires space in front of the garage to open.
    Less insulation than sectional doors.
    Fewer automation options compared to sectional doors.
  • Difficult to ship
  • Out of date concet but imperitive when there is very limited Headroom
  • Best For: Budget-conscious homeowners with ample driveway space.

3. Roller Garage Doors

  • Design: Curtain roll up vertically into a compact drum above the opening.
  • Pros: Minimal horozontial space needed inside the garage.
    Works well for small driveways or narrow spaces.
    Compatible with automated systems.
    Durable and low maintenance.
  • Cons: Very Limited/Nil insulation options.
    Premium models can be more expensive than other doors.
  • Best For: Sheds and older homes where there is limited limited driveway space or modern design preferences, including urban homes.

Yes, these can be fitted at anytime.
Currently there are very cost effective quality auto's available in the market from the likes of Bunnings. Check out our installation page for a video on how to retro-fit an auto opener.

Bunnings Install a Roller Door opener

Regular cleaning, lubrication of moving parts, and inspection of springs and tracks is recommended, but do not Oil or Grease the guides themselves.

Garage Doors typically have a 12 Month warranty, while they are painted with the same Colorbond process, this is less than roof's as they are a moving, flexible curtain and made of softer, lower tensile steel compared to those used for roof and wall cladding materials

Roller Doors are not generally insulated but some customers have had limited success lining the inside of the door with Aircell Aluminium Bubble or similar, althought this can cause rubbing of the paint finish when the door is rolled up.

Shipping

Yes, we ship all over the world. Shipping costs will apply, and will be added at checkout. We run discounts and promotions all year, so stay tuned for exclusive deals.

It depends on where you are. Orders processed here will take 5-7 business days to arrive. Overseas deliveries can take anywhere from 7-16 days. Delivery details will be provided in your confirmation email.

We use all major carriers, and local courier partners. You’ll be asked to select a delivery method during checkout.

Product

We always aim for make sure our customers love our products, but if you do need to return an order, we’re happy to help. Just email us directly and we’ll take you through the process.

It depends on the creator and the product. All options are outlined on the product page, so look out for customization options there.

Other

You can contact us through our contact page! We will be happy to assist you.

Any question?

If we still haven't answered your question, you can contact us below and we will get back to you as soon as possible.

Customer support

Enter your text here

Send a message

Enter your text here

Recently viewed