How to Install Sectional Doors
At Door Supply, we understand the importance of clear and accurate guidance when it comes to garage door installation. That's why our website features a dedicated installation page, packed with detailed instructions and guides. To help you with installing a garage door, our resources are specifically designed to assist every step of the way.
Our comprehensive guides cover everything from the initial steps of garage door installation to the final touches in installing a garage door. These user-friendly instructions are perfect for both DIY enthusiasts and professional garage door installers. Available for online viewing and download, our installation guides ensure you have the necessary information at your fingertips for a successful and efficient installation process.
Taking on any installation job yourself is a great way to save money. When installing a new door for your home, shed, workshop or commercial building, you must ensure its safe and smooth operation, which means installing it correctly.
If you are confident at DIY or a builder, follow our installation instructions. Refer to the installation manual for your door type for exact specifications and measurements.
Safety Checklist
Before you start your roller door installation, check the following:
- All supporting walls are structurally sound to avoid damage.
- You have the correct fasteners for your structure.
- You have adequate space above the doorway to house the rolled-up garage door and fittings.
- The surface above the doorway is flush and free from any protrusions.
- You have sufficient room on each side of the doorway for the tracks.
- Your work area is clear from obstruction.
- You’re wearing appropriate safety gear - gloves, boots, and safety goggles.
Tools Required
Your checklist for garage door installation should include the following materials:
- Two-step ladders
- A laser level
- A spirit level
- Screwdrivers and a pipe wrench
- A power drill and drill bits
- A softwood chock about 400mm long
- A socket set
- A tape measure and stanley knife
- A marker pen or pencil
Pre-Installation Requirements
Once you receive your delivery, unpack and check each part against the installation checklist. Do not remove the strapping around your garage doors. Check the installation instructions specific to your door type. Ensure that your working space is clear from obstructions prior to installation.
Downloadable Installation Instructions
- Taurean Sectional Door guide
- Sectional Door Low Headroom Kit instructions
After Installation Guide
Modern garage doors require minimal routine maintenance. Every six months, follow these instructions:
- Clean the curtain with a soft cloth or sponge and mild detergent in warm water.
- Rinse with clean water immediately to remove any trace of detergent.
- Inspect the brackets, springs, tracks, fasteners, cables, and weather seal for any signs of wear and tear.
- Lubricate the springs with grease or oil.
- Do not lubricate the locking mechanism - this may cause it to malfunction.
- Do not oil the tracks; clean on occasion with spirit cleaner.
- Perform a balance test. Close the door, then lift it to waist height. The door shouldn’t move. If it does, you may need to rebalance the spring.
Garage door springs are very tightly wound, which means they are under a great deal of tension. If a spring breaks or you try to adjust one without proper knowledge of the procedure, it can cause serious injury. If you have questions or concerns about your spring maintenance, we recommend consulting professional services.
FAQs
Can I install a Garage door myself?
Yes, you can. Make sure you have the necessary tools and follow our step-by-step installation instructions.
How long does it take to install a Sectional Garage door?
Typically, a complete installation can take one person up to 90-120 minutes.
View our range of quality roller door options for your garages or sheds, including shutter doors and sectional garage doors. Contact us for more information and request a quote today.