Not currently available for purchase on it's own, only avalable with a door.
Before specifying, investigate prevailing wind direction and expected maximum velocities at site. Read about the Construction Code Changes here
Windlock Doors - Taurean Doors Systems certify that this door meets the ultimate wind pressure ratings of Australian Standard AS/NZS 4505 and is fit for purpose in Regions A and B (non-cyclonic areas) of Australia when installed according to instructions.
WindStrong Doors - For Region C and D, please refer to this brochure for design information - Windstrong Design Specs
Note: Wind Locked and Wind Strong Doors are not provided with fasteners for the Brackets and Guides. Please refer to your building designer for the fastener specification and to ensure you source the correct screws. Fasteners in the parts boxes are standard doors and are not rated for Wind Lock or Wind Strong doors.
Installing a roller door yourself is a rewarding project that can save you hundreds of dollars.
But are garage doors hard to install on your own? The short answer: not if you have the right tools, a mate to give you a hand, and guidance. That’s why we’ve put together this comprehensive DIY garage door installation guide, full of step-by-step instructions, tips, and videos to help you how to install a roller door correctly the first time.
Before you start your roller door installation, check the following:
All supporting walls are structurally sound to avoid damage.
You have the correct fasteners for your structure.
You have adequate space above the doorway to house the rolled-up garage door and fittings.
The surface above the doorway is flush and free from any protrusions.
You have sufficient room on each side of the doorway for the tracks.
Your work area is clear of obstructions.
You wear appropriate safety gear—gloves, boots, and safety goggles.
Tools you’ll need
Your checklist for garage door installation should include the following materials:
Two-step ladders
A laser level
A spirit level
Screwdrivers and a pipe wrench
A power drill and drill bits
A softwood chock about 400mm long
A socket set
A tape measure and a Stanley knife
A marker pen or pencil
How to prepare
Clear the area: Remove vehicles and stored items.
Check power access: Ensure outlet availability for motorised doors.
Inspect the opening: Verify measurements and structural integrity.
Gather tools: Have everything ready before starting.
Review instructions: Read through the entire installation guide first.
Arrange help: Have an assistant available for lifting.
Pre-installation tips
When your roller door arrives, inspect each component against the installation checklist. Keep the protective strapping around your door intact until installation. Review the installation instructions specific to your door and ensure your workspace is clear of obstructions before you begin.
What is supplied
Each Door comes with guides (tracks) and a parts box. To see what is in the box click here
If you order a lock this is usually clipped to the end of the door roll.
Mark bracket positions: Measure the roller door width and mark it on each wall, adding the extra width required (as noted on your model’s installation instructions).
Check clearances: Ensure there’s enough headroom and side space for installation.
Mount the first bracket: Hold it in place, mark the holes, drill, and bolt securely (weld if attaching to steel framework).
Level and mount the second bracket: Use a laser level to align and install the bracket on the opposite wall.
Lift the rolled-up door: With assistance and safe lifting methods (ropes, etc.), raise the door and rest it on the brackets.
Fit the axle: Slide the axle into the bracket slots with the door facing forward to roll down the front.
Secure loosely: Attach U-bolts and saddles, then centre the door in the opening. Rotate the curtain: Turn the door so the bottom edge ends up inside the garage.
Step 2: Set spring tension
Attach axle: Secure the axle to the brackets using washers and nuts.
Apply spring tension: Rotate the door forward as specified in your manual (turn count depends on door size).
Cut the strapping: Have your mate cut the straps while you maintain spring tension.
Lower curtain and secure: Gently pull the curtain down and place a wooden chock to hold it until the tracks are installed.
Test the door: Repeat the process if needed.
Step 3: Install the tracks
Check alignment: Pull the door down, ensuring an even overlap on both sides of the opening.
Fit the first track: Slide the first track onto the curtain edge and loosely fasten it to the wall.
Repeat on the other side: Use a spirit level to ensure both tracks are perfectly vertical.
Test door movement: Slide the door up and down to check tension and track clearance. Adjust if needed.
Secure tracks: Once satisfied, tighten all fasteners.
Attach handle and weight bar: Fit the external handle and, if included, the weight bar to the bottom rail for added stability.
How to install a roller door opener
Installing roller door motors doesn’t involve any electrical wiring (as long as you already have a power outlet near your door), so they’re easy to install yourself.
Check door balance: Ensure your roller door operates smoothly manually first.
Mount the motor: Install above the door centre using the provided brackets.
Attach drive shaft: Connect the drive shaft to the motor and adjust to the correct length.
Install safety sensors: Position safety sensors on both sides of the opening, properly aligned.
Plug in the system: Connect the motor, sensors, and controls per the manufacturer's diagram.
Program settings: Set travel limits, force settings, and remote controls.
Test thoroughly: Run multiple cycles and verify that the safety sensors work.
Always follow your specific door’s installation instructions. We also recommend hiring a professional garage door installer as a safety precaution and for peace of mind.
Post-installation maintenance
Modern garage doors need minimal routine maintenance, but we recommend you follow this six-monthly checklist to keep things running smoothly.
General cleaning and inspection
Wipe down the door curtain using a soft cloth or sponge with mild detergent and warm water.
Rinse immediately with clean water to avoid residue buildup.
Inspect the brackets, springs, tracks, fasteners, cables, and weather seal for signs of wear or damage.
Lubrication tips
Apply grease or oil to the springs to keep them operating quietly.
Avoid lubricating the locking mechanism, as that may cause it to malfunction.
Don’t oil the tracks. Instead, clean them occasionally using a spirit-based cleaner.
Door balance test
Check the spring tension by performing a simple balance test:
Close the door.
Lift it to waist height.
If the door stays in place, the spring tension is correct. If it moves, you may need to rebalance the spring.
Re-tensioning the spring
Spring maintenance can be dangerous. Garage door springs are under high tension and can cause serious injury if mishandled. If you're unsure, we recommend consulting professional services. Only proceed if you are confident in your ability and have assistance.
Tie ropes around each end of the door roll to secure it.
Both you and your assistant should be on ladders at each end of the door.
Grip the axle firmly using a large pipe wrench.
Loosen the U-bolt nuts at both ends while maintaining grip on the wrench.
Rotate the axle clockwise to increase tension and anticlockwise to reduce it.
Re-tighten the U-bolts and carefully release the pipe wrench.
Coning
Does your roller door roll up out of line and the layers start to shape like a cone - this video will help explain why and what to do to fix, it is a simple job and could save you a considerable call out fee.
Video installation guides: How to install roller garage doors yourself
Follow these video instructions carefully to safely install your new garage door.
Taurean doors
Windlock doors
While this installation guide features a Centurion Door, it shows proper Windlock fitting techniques that apply across brands. Focus on the lifting and Windlock attachment methods—these will help ensure your installation goes smoothly, regardless of your specific model.
Chain-operated doors
This boat shed installation shows the basics of installing a chain-operated roller door, including proper chain routing and tension adjustment for any chain-operated door setup.
Frequently asked questions
How much does it cost to install a garage roller door?
Hiring a professional garage door installer typically costs $250 to $450, depending on door size, location, travel time, and whether an existing door needs removal. DIY installation saves this entire cost, making it an attractive option for handy homeowners.
Are garage doors easy to install?
Roller doors are moderately easy to install for those with basic DIY skills. The process is straightforward with the proper door installation instructions. Most DIYers complete the installation in 90-120 minutes.
How long does it take to install a roller door?
Professional installation can take around 45-60 minutes, while DIY installation takes around 90-120 minutes. Installing a motor usually adds 30-45 minutes to this time.
Can you insulate a garage door after installation?
Yes! You can insulate most roller doors using garage door insulation products, such as reflective foil insulation.
Clean your door: Wipe down your garage door interior with a rag and methylated spirits.
Measure and cut: Carefully measure and cut the insulation to fit your door panels.
Secure properly: Use silicone adhesive to attach the insulation to your door.
Ready to start your DIY garage door installation?
Door Supply offers a complete range of quality roller doors that are perfect for DIY projects. View our range of quality roller doors, sectional doors, and commercial shutters. Contact us for more information or to request a quote today.
Roll over image to zoom inClick on image to zoom
/
5 stars: 1 (25%)
4 stars: 2 (50%)
3 stars: 1 (25%)
2 stars: 0 (0%)
1 star: 0 (0%)
J
Joe Cook
A good product
A good product, does what it says it will do. Again, same as the door, the installation instructions could've been more detailed(first time diy-er)
A
Angelo Said
I got the Low Headroom Kit or what you call part of it
I got the Low Headroom Kit or what you call part of it. I got just the rail no bracketts or bolts and nuts with it I still manage to in stall it.
Buying and Selection
Yes, every door is made to order to your size. Doors are priced in size breaks, so any door from 2551mm to 2800mm wide is sold at the 2800mm price. Choose the size break, then type your exact door width in the box provided.
Order by door size, not opening size. Measure your opening width in three places and use the smallest.
Openings 950–3430mm (Series A): add 50mm.
Openings 3431–5100mm (Series AA), or any door with windlock guides: add 100mm.
Height: choose the next height up from your opening.
All our doors are made from the same 0.40mm BlueScope Colorbond® steel. It is the same thickness as most roofing, but the steel is softer (a lower tensile rating) so it can flex as the door rolls up and down without splitting. The higher-grade coastal coatings used on roofs are not available for garage doors.
Regular washing makes your door last longer, especially in areas rain doesn't reach. Keep an eye on the area just under the lintel, and the top of the roll: roll the door up about 200mm and wash the top of the roll, which is then visible from inside the garage.
1. Sectional garage doors
Design: horizontal panels that slide up and overhead when opening.
Pros: space-saving inside and outside the garage; good insulation options; high security; smooth operation with automatic openers.
Cons: slightly higher cost than tilt doors; usually needs a professional installer or a competent DIYer.
Best for: homeowners wanting a modern look, insulation and security, especially for attached garages.
2. Tilt garage doors
Design: a single solid panel that tilts outward and lifts up.
Pros: simple and cost-effective; durable and low maintenance; easy to operate by hand.
Cons: needs space in front of the garage to open; less insulation than sectional doors; fewer automation options; difficult to ship.
Best for: sites with ample driveway space, or where headroom is very limited.
3. Roller garage doors
Design: the curtain rolls up vertically into a compact drum above the opening.
Pros: needs minimal space inside the garage; suits small driveways and narrow spaces; works with automatic openers; durable and low maintenance.
Cons: very limited insulation options; premium models can cost more than other doors.
Best for: sheds, older homes and urban homes with limited driveway space.
Yes, an opener can be fitted at any time. There are good-value openers available from retailers such as Bunnings. Our installation page has a video showing how to retro-fit one.
Clean the door regularly, lubricate the moving parts, and check the springs and tracks. Do not oil or grease the guides themselves.
Our garage doors come with a 12-month warranty. The curtain is painted with the same Colorbond process as roofing, but the warranty is shorter than for roofing because the curtain is a moving, flexible part made from softer, lower-tensile steel.
Roller doors are not generally insulated. Some customers have had limited success lining the inside of the door with Air-Cell aluminium bubble foil or similar, although this can rub the paint finish as the door rolls up.
Delivery and Pick-up
We deliver to most of Australia for $150 per order, not per door. Doors arrive on the manufacturer's truck with a crane to lift them off.
Areas outside our standard delivery zones have extra freight, which we confirm with you before your order goes ahead. We deliver within Australia only.
Yes. Pick-up is free from 19 locations. Choose pick-up at checkout.
Every door is made to order, so allow 2–3 weeks for manufacture. We confirm your delivery date once the factory has scheduled your door.
Orders and Returns
Every door is made to your measurements, so we can't accept returns for change of mind or measuring mistakes. Please check your sizes carefully before ordering, and contact us if you're unsure.
This doesn't affect your rights under Australian Consumer Law. If your door is faulty or damaged in transit, contact us and we'll arrange a repair or replacement.
All our roller doors come in the Colorbond® range. See our Colours page for swatches.
Still have a question?
Email us and we'll get back to you, or read our measuring guide before you order.
We supply custom roller doors to Melbourne, Sydney, Brisbane, Perth, Adelaide Hobart and regional Australia with 23+ pick up locations. elivery is available nationwide*. Production currently running at approximately 3 weeks and doors are then shippied to the nearest branch to manage local delivery (Allow 5-7 working days to NSW, Tasmania, Brisbane, Adelaide and Perth, 10 days to FNQ and NT).
Regional & Remote Deliveries: For areas outside our standard network, we offer coordinated delivery via local carriers. Contact us for a custom freight quote.
Please check this delivery map for our standard delivery areas.
B&D Doors
B&D Doors can no longer be supplied by Doorsupply, B&D have decided to no longer participate in the DIY space and doors must be ordered through their local Authorised Dealer.
As every Door is custom made for you we are unable to accept returns if you have made a mistake with measuring.
About Us
Since 2009 Door Supply has been providing quality doors and access solutions for residential, commercial, and industrial applications. As an Australian-owned business we work with builders, trades, and homeowners nationwide, offering reliable products, expert advice, and fast delivery. Our focus is on durability, performance, and straightforward service you can trust.
Good morning, I ordered a custom roller door from your company a couple of weeks ago, I was given the delivery date of 13th May. At the time of order I thought like most companies this would just be an estimated date and understand things can be delayed. I was very happy to receive a delivery update on the 13th and received a call several hours prior of when the driver expected to arrive at my delivery address. He arrived at the time he had advised and was very friendly.
I printed the installation instructions and when installing found these very east to follow.
The door has been installed by myself and is working wonderfully with no issues.
A good product, does what it says it will do. Again, same as the door, the installation instructions could've been more detailed(first time diy-er)
Gayle & Graham Patton
Panel lift door
We recently purchased a woodgrain sectional panel lift door and couldn’t be happier with the result. The door arrived promptly after ordering. The woodgrain finish looks fantastic. Overall, we’re very happy with the quality and would recommend this product.
Door Supply
Daniel Thomas
Night sky roller doors
Fast delivery🤙🏽 great quality colour bond roller doors easy to install packaged well with no issues or damage 🙌🏻
2200mm High x 2550 Domestic Standard Roller Door with Centre Lock
ANDREW P
Great Door
Sectional Door – Mid Height (up to 2450mm)
Ultan Molloy
Easy to navigate website and customer service was great
Easy to navigate website and customer service was great.
Door Supply
Ultan Molloy
Great door and good value
Great door and good value. Very happy with this product.
2200mm High Domestic Roller Door | Australian Made BlueScope Steel
