15 Best Shed Doors: Compare Materials, Sizes & Prices

15 Best Shed Doors: Compare Materials, Sizes & Prices

15 Best Shed Doors: Compare Materials, Sizes & Prices

Nothing derails a backyard upgrade faster than a door that jams, rattles, or rusts within a season. Whether you’re fitting out a fresh Colorbond kit, weather-hardening a farm workshop or replacing a battered garden-shed panel, the right door is the difference between a storage space and a headache. Australian buyers now face more choice than ever—steel, timber, fibreglass, PVC, hinged, sliding, roller, even cyclone-rated options—all pitched at wildly different price points.

To save you scrolling through catalogues and spec sheets, we’ve road-tested the 15 shed-door models most commonly ordered around the country in 2025 and compared them side-by-side. Each pick is scored for weather resistance, security, DIY friendliness, nation-wide availability, warranty coverage and price per square metre, so you can match a door to your climate zone, budget, and skill level with confidence. From a $165 zincalume panel to a fully automated sectional door, you’ll see real-world costs, standard and custom sizes, and the trade-offs to watch for. Read on, measure up, and start short-listing.

1. Doorsupply Colourbond Custom PA Shed Door (Best Overall for DIY & Aussie Conditions)

If you want a door that arrives ready to screw in, matches your Colorbond cladding and cops a tropical downpour without flinching, this custom PA (personal-access) unit from DoorSupply is the benchmark. It wins the top spot because it’s built for Australian wind loads, ships Australia-wide for free, and needs only a cordless drill and a level to install—no chiselling jambs or planing edges.

Key Features & Material Quality

  • Bluescope COLORBOND® steel skin folded over a fully galvanised frame
  • UV-stable paint and baked-on finish resist salt spray and fading
  • Pre-hung in its own 1.0 mm steel jamb with weather seal already fitted
  • Optional cyclone-rated upgrade meets AS/NZS 1170.2 for Regions C & D

Size Range & Tailor-Made Options

  • Widths: 720 mm to 1100 mm (in 10 mm increments)
  • Heights: 2000 mm to 2400 mm
  • More than 20 Colorbond colours, plus left/right hinge configuration
  • Extras: lever set, deadbolt, door closer or pet-flap cut-out

Pricing Snapshot & Delivery

For a common 820 × 2040 mm door expect about AU$720 ex-GST. Each additional 100 mm of width or height adds roughly AU$40–AU$60. Orders placed online are manufactured in Melbourne and trucked free to metro depots within 3–4 weeks; regional freight incurs a modest surcharge.

Pros, Cons & Ideal Use Cases

Pros: custom fit, five-year warranty, matches standard shed profiles, clear DIY instructions.
Cons: steel skin needs occasional fresh-water rinse in coastal settings.
Ideal for: hobby sheds, farm workshops, detached garages and any project where secure, colour-matched shed doors must go in without a tradie.

2. Ranbuild Colorbond Roller Shed Door

Need wide, clear head-room and the ability to park a ute without clipping mirrors? A Colorbond roller door from Ranbuild is the classic big-opening solution that still seals tight against dust and driving rain—ideal for farm machinery bays or triple-garage conversions.

Construction & Durability

The single-skin curtain is roll-formed from genuine Bluescope steel, then coated in your chosen Colorbond colour. Nylon felt webbing between each rib cuts the metal-on-metal rumble you hear in cheaper roller shed doors and minimises paint scuffing. Aluminium bottom rail with moulded weather seal keeps mice and leaf litter out.

Standard & Oversized Widths

  • Suits openings 2400–5500 mm wide and 2100–3000 mm high
  • Optional wind-lock kit upgrades the guides to comply with Region D cyclone ratings
  • Minimal side-room: only 75 mm clearance required each jamb

Cost & Installation Factors

Budget AU$1,200–AU$2,800 supply-only, depending on span and wind rating. A local Ranbuild installer typically charges ~AU$450 to mount the drum, guides and lockset. Add an automatic opener (Merlin or ATA) for $400–$650 if the door will be used daily. Two-person lift recommended; allow 600 mm head-room for the roll.

3. Lathams Pre-Hung Steel Security Shed Door

When the shed houses expensive kit—think ride-on mowers, welders or a tradie’s tool trailer—cheap pressed panels just won’t cut it. Lathams’ pre-hung steel unit borrows from commercial security doors yet still installs like the other DIY-friendly shed doors on this list.

Heavy-Duty Build Specs

  • 1.6 mm zinc-coated steel skins welded to a reinforcing frame
  • Honeycomb core for impact resistance without excessive weight
  • Three stainless-steel hinges and a factory-fitted three-point mortice lock
  • Powder-coat finish in primed grey ready for top-coat or left as-is

Size & Fire-/Wind-Rating Options

Standard leaves come in 920 mm and 1020 mm widths, but Lathams will fabricate up to 1350 mm wide for oversize farm openings. An optional BAL-40 skin and intumescent seals help meet bushfire regulations, while additional fixing points let the door achieve Region C wind ratings.

Pricing & Availability

Expect ~AU$1,050 for a 920 × 2040 mm set supplied, with customs climbing for BAL or oversize builds. Manufacture runs two to three weeks, and the door ships pallet-wrapped—organise a forklift or at least two strong backs for unloading.

4. Larnec Weather-Tight Fibreglass Personal Access Door

Timber looks warm but swells, steel is strong but can rust—fibreglass splits the difference. Larnec’s weather-tight PA door is vacuum-formed in one piece, giving DIY builders a light yet rigid alternative that shrugs off red dust, salt spray and the odd whack from the mower handle. It’s the very reason many pros single out fibreglass when asked what the “best type of door for a shed” might be.

Material & Weather Performance

  • Compression-moulded fibreglass skins sandwich kiln-dried timber stiles for stiffness without conductive cold spots.
  • Impervious to rot, termites and corrosion; will not dent or warp under full summer sun.
  • Factory-fitted perimeter seal and aluminium threshold keep rain and leaf litter outside the shed.

Custom Colours & Hardware

Supplied pre-finished in low-sheen white that you can top-coat to match Colorbond cladding. Marine-grade stainless hinges, striker plate and a rebated lock block handle Australia’s coastal humidity with zero rust streaks.

Cost & Warranty

Budget between AU$860 and AU$1,100 depending on width and BAL upgrades. Every door ships pre-hung with fixings and carries a 10-year structural warranty, making it one of the lowest-maintenance shed doors you’ll buy this decade.

5. AMIA Sliding Steel-Clad Shed Door

If you want wide, unobstructed access without chewing up internal floor space, a sliding panel is hard to beat. AMIA’s steel-clad model borrows farm-gate toughness but finishes clean enough for suburban workshops, making it one of the more versatile shed doors on the market.

Design & Track System

  • 0.42 mm Colorbond sheet riveted to a welded SHS steel frame
  • Hot-dip galvanised overhead track with adjustable nylon twin-wheel hangers for smooth, rattle-free travel
  • Bottom guide plate keeps the leaf from kicking out in high wind

Sizing Versatility

Single-panel options span 900 mm to 3600 mm wide and up to 3000 mm high. Need more? Specify a bi-parting ‘barn door’ pair and open a massive 7200 mm clear width—ideal for tractors or boat trailers.

Investment & DIY Difficulty

  • Door leaf starts around AU$650; the full kit (panel, track, brackets, guides) lands near AU$1,150
  • Two-person lift essential; pre-plan wall noggings at track height to anchor the brackets securely
  • Allow an afternoon for install; only basic hand tools and a level required

6. EasyShed Double Hinged Garden Shed Door Kit

Replacing flimsy single-leaf panels with a wider opening doesn’t have to cost a fortune. EasyShed’s bolt-on double-door kit drops straight into most of the brand’s popular flat-pack sheds and, thanks to pressed steel construction, still keeps weight down so the existing wall framing copes.

Kit Contents & Panel Construction

  • Two folded-steel door leaves with return edges for stiffness
  • Matching jamb channels, zinc-plated hinges, backing plates and tek screws
  • Pre-drilled T-handle with internal twist latch and pad-bolt provision

Pre-Cut Sizes

Designed for EasyShed walls: fits an opening 1500 mm (W) × 1800 mm (H). Light trimming of aluminium floor channel may be required; instructions cover the steps.

Budget Price Point

Expect ~AU$340 delivered in metro areas. That buys one of the most affordable double-leaf shed doors on the market—perfect for breathing new life into a dented garden locker without blowing the weekend budget.

7. Stratco Remote-Control Sectional Panel Door

If your “shed” is really a downsized garage—housing a project car, camper trailer or even the family bikes—a fully balanced sectional door brings genuine drive-in convenience without gobbling internal headroom like older tilt panels. Stratco’s remote-control package is purpose-built for DIY installers, arriving pre-sprung and factory-notched for standard Colorbond wall frames.

Panel & Hardware Specs

  • Four-panel Colorbond skin with wood-grain embossing to resist scratches
  • Pinch-resistant interlocks and nylon-coated rollers for whisper-quiet travel
  • Galvanised torsion spring rated to 20,000 cycles

Automation & Safety

  • Included smart DC opener with soft-start/soft-stop and battery-back-up port
  • PE beam sensors stop the door if kids, pets or tools break the light path
  • Two handheld remotes plus wall button as standard

Typical Project Cost

  • Supply of a 2400 × 2100 mm door, rails, springs and motor: about AU$2,900
  • Allow AU$550–AU$800 for professional install if you’d rather skip ladder time
  • Extra height panels add roughly $180 per 100 mm; colour upgrades $120

8. Shed Windows & More Fibreglass Shed Door (US import, stocked by select AU resellers)

Can’t find the right size locally or want fibreglass without the local price premium? A handful of Australian distributors now carry Shed Windows & More’s pre-hung fibreglass door, shipped in from the US and tweaked for metric frames. It installs like most hinged shed doors yet shrugs off red dust, salt spray and stray cricket balls with equal ease—handy when the mower, bikes and surfboards all live in one space.

Weather & Impact Resistance

  • Twin fibreglass skins bonded to a rigid polyurethane foam core
  • Zero rot, rust, termites or swelling; dents simply pop back out with gentle heat
  • White gel-coat finish arrives ready for a light sand and top-coat if colour-matching

Pre-Hung Metric Conversions

Import sizes are factory-trimmed to fit 2040 mm high openings with either 810 mm or 910 mm widths, complete with jamb, hinges and drilled bore for a standard 54 mm knob or lever set.

Landed Cost Considerations

Budget about AU$950 for the door itself, then add ~AU$180 freight from the east-coast warehouse (regional deliveries may vary). Even with shipping, it undercuts many Aussie fibreglass shed doors while offering similar longevity.

9. Bunnings Cedar Timber Shed Door Panel

Chasing a classic, cottage-style look without paying a joiner? Bunnings’ off-the-shelf cedar panel gives DIY builders a solid-timber option that drops straight into a standard 2040 mm opening. It answers the common “can I use a regular door for a shed?” question with a yes—so long as you’re prepared for a bit of upkeep.

Natural-Timber Appeal

  • Solid western red cedar tongue-and-groove boards bonded to a mortice-and-tenon frame
  • Arrives raw so you can stain, oil or paint to suit heritage or Hamptons façades
  • Naturally termite-resistant and aromatic—no chemical treatments required

Standard Dimensions

  • Single size 820 × 2040 mm; can be trimmed up to 10 mm on each edge for out-of-square sheds
  • 35 mm thickness slots into most off-the-shelf jamb kits available at the same retailer

Budget & Maintenance

  • Panel-only price hovers around AU$299; add ~AU$80 for a primed pine jamb kit and hinges
  • Annual oil or two-yearly exterior paint is essential to prevent cupping and greying
  • Best suited to low-exposure garden sheds or hobby studios where natural warmth outweighs the need for zero-maintenance shed doors

10. Fortress Wind-Strong Roller Door (Cyclone-Rated)

When your shed sits in a Region C or Region D wind zone—think Darwin, Townsville or a coastal ridge—standard roller curtains can bow, jump the guides and leave gear exposed. Fortress’ Wind-Strong model adds serious muscle without the price blow-out of full commercial shutters, giving DIY owners a compliant, good-looking solution.

Structural Strength

The curtain uses 0.55 mm high-tensile steel slats with deep ribs for rigidity. Interlocking wind-lock clips engage reinforced aluminium side guides so the door stays seated even under cyclic pressure. A chunky steel bottom rail with bulb seal finishes the weather barrier.

Rating & Certification

Independently tested to AS/NZS 4505 and certified for Region D, C3 classification. A laminated certificate and pressure graph arrive with the door—handy for council sign-off on new builds.

Cost Range

Pricing starts around AU$1,800 supply-only for a 3000 mm × 2400 mm opening. Factor an extra $250–$400 for heavy-duty guides, lock-bar kit or motor brackets. Transport is palletised; two-person lift required.

11. Lysaght Steel Sliding Barn Shed Door

Looking to give your machinery shed or backyard studio a bit of country swagger without compromising on longevity? Lysaght’s sliding barn-style door blends farm-fresh looks with the engineering you’d expect from one of Australia’s biggest steel names. Because the panel glides outside the wall line, you keep the full internal ceiling height and avoid the swinging-door clearance crunch that plagues narrow yards.

Aesthetic & Build

  • Classic corrugated Colorbond® sheet riveted to a welded SHS steel frame
  • Choice of 22 standard colours plus galvanised “Zincalume” for raw industrial appeal
  • All fasteners and track hardware hot-dip galvanised to shrug off coastal moisture

Opening Options

  • Specify a single leaf up to 3200 mm high and 3600 mm wide, or order a bi-parting pair for a 7200 mm span
  • Overhead track includes nylon-tyred rollers and adjustable stops; optional soft-close kit prevents panel slam in high wind

Pricing & Lead Time

Budget roughly AU$780 for the door leaf alone; the complete kit with track, guides and mounting brackets lands near AU$1,400. Orders are made-to-measure in regional plants and typically ship within 10–15 business days.

12. Absco Economy Zincalume Hinged Door

Replacing a warped panel on a utility or garden shed? Absco’s economy Zincalume door is Australia’s no-frills, lowest-priced upgrade for light-duty storage.

Lightweight Construction

  • 0.30 mm Zincalume sheet with folded box edges adds enough stiffness for daily swings.
  • Full-height galvanised piano hinge reduces screw pull-out in thin shed frames.

Fixed Sizes

  • Single size 750 × 1900 mm tailor-made for Eco-Range panel kits.

Rock-Bottom Cost

Price lands around AU$165 delivered flat-packed. Rivets are in the box; a cordless drill and hand-riveter knock the fit-up over in half an hour.

13. Simply Sheds Ventilated Mesh Steel Door

Hot sheds breed mould, paint fumes and battery-tool off-gassing. Simply Sheds tackles the issue with a mesh-infused steel leaf that keeps air circulating while still offering the strength you expect from quality shed doors.

Unique Vent Solution

A diagonally braced 0.9 mm galvanised frame carries a perforated 3 mm mesh panel across the top third of the leaf; fresh air flows freely, but rodents and wind-blown debris stay out.

Customisable Widths

Supplied off-the-shelf in 820 mm and 920 mm, or made to order up to 1100 mm for mower-sized trolleys. Standard height is 2040 mm, matching most Aussie kit sheds.

Price & Add-Ons

Expect AU$430–AU$520 delivered. Add a snap-in fly-screen liner for another AU$90, or upgrade to stainless hinges (+AU$25) if the door sits in a salt-spray zone.

14. Juralco Aluminium Louvre Shed Door

Want constant airflow without propping the door ajar or worrying about rust? Juralco’s aluminium louvre model is designed for humid or coastal sheds that need breathing space as much as security. The extruded frame weighs next to nothing, so even a bigger panel hangs happily off standard shed studs.

Corrosion-Proof Aluminium

Marine-grade aluminium frame and jamb, powder-coated in 10 stock colours, laugh off salt spray and fertiliser fumes. Stainless hinges and fixings mean zero galvanic corrosion.

Airflow & Light Control

152 mm adjustable glass louvres tilt from fully shut to wide-open with one lever, letting you dial in breeze and daylight. Optional insect mesh clips in behind the blades.

Indicative Cost

Expect AU$1,050–AU$1,350 supplied pre-hung at 820 mm or 920 mm widths; custom heights to 2400 mm add about $90 per extra 100 mm. Lead time is two weeks metro, pallet freight nationwide.

15. Auto-Lok PVC Composite Shed Door (Rust- & Dent-Free)

If you store fertilisers, pool chemicals or simply hate repainting, Auto-Lok’s rigid-PVC composite door is the set-and-forget option. The skin is colour-fast right through, so scratches don’t expose bare steel, and the foam core adds a welcome thermal break—winter condensation and summer heat both drop noticeably. At barely 18 kg for a full-size leaf it’s also easy on flimsy kit-shed framing.

Material & Insulation

  • UV-stabilised PVC skins bonded to a dense closed-cell foam core
  • Won’t dent, corrode, or conduct heat; wipe clean with soapy water
  • Integral weather seal moulded into the bottom edge

Sizes & Colours

  • Standard widths 820 mm and 920 mm; height 2040 mm
  • Colours: white, almond, slate grey—pigment runs through the plastic, no repainting

Pricing & Supply

  • Door leaf ~AU$640 supply-only
  • Hinge/lock kit AU$85; ships in a single carton via courier
  • Five-year fade and warp guarantee, metro delivery inside 10 days

Making Your Choice

Steel, fibreglass, timber, aluminium or PVC—each material shines in a different setting.

  • Steel earns top marks for outright security and colour-matching Colorbond sheds.
  • Fibreglass laughs at rust and temperature swings, perfect for coastal or tropical backyards.
  • Timber brings heritage charm but needs regular oil or paint.
  • Aluminium and PVC are the grab-and-go options when zero maintenance is the brief.

Whichever way you lean, tick three boxes before you click “buy”:

  1. Wind rating – Region C/D sites demand certified hardware, especially on wide roller curtains.
  2. Tape-measure truth – measure the opening twice, frame clearance once.
  3. Usage pattern – if you’ll open the door daily, budget for an automatic opener or soft-close kit up-front.

Ready for a firm quote? Browse the full range of shed doors, roller doors and PA panels at DoorSupply and get the right door, delivered to your driveway.