Shed Doors In Australia: 12 Options, Costs & Buying Tips
Picking the right shed door shouldn’t be guesswork. Get it wrong and you’ll battle leaks, rattles, jammed tracks and poor security; get it right and your shed is easier to use, safer and better looking. The trouble? Australia’s mix of sizes, wind regions and coastal conditions makes the choice less than simple. Do you need quick people access, wide vehicle clearance, cyclone resistance or all of the above? Are you after a DIY-friendly kit or a made‑to‑measure upgrade in a specific colour?
This guide breaks down 12 shed door options available in Australia—what each is, when to choose it, typical local costs and key buying tips most people miss. From PA doors and standard roller doors to wind‑rated models, sliding, sectional, hinged and replacement kits, we’ll help you shortlist with confidence. Ready to compare your options and budget? Let’s run through the choices and what to watch before you buy.
1. DoorSupply personal access (PA) doors for sheds
DoorSupply’s PA doors give you quick, secure people access without opening the big door. They’re Australian‑made, DIY‑ready and available to colour‑match your shed.
What it is
Pre‑hung steel PA doors in their own frame for straightforward install. Available in 20+ COLORBOND colours with hardware options.
When to choose this
Use for quick entry/exit while keeping vehicle doors locked. Ideal for workshops, farm sheds and garages.
Typical costs in Australia
PA doors are generally a cost‑effective shed‑door option. Price depends on size, hardware and finish; request a made‑to‑measure quote.
Buying tips and watch-outs
Measure the opening and confirm swing/handing before ordering. Check seals, stainless hinges and lead times/delivery access.
2. Standard steel roller doors
The go‑to shed door for vehicle access, a reliable all‑rounder that maximises space and keeps weather out. They’re common on sheds and garages.
What it is
A steel curtain door that rolls into a drum above the opening, running in side tracks. Manual or motorised.
When to choose this
For frequent vehicle access with minimal driveway clearance and solid weather sealing. Suits most domestic sheds and garages.
Typical costs in Australia
Budget about $3,000 for basic shed roller doors; costs rise with width. Very wide openings can approach $50,000.
Buying tips and watch-outs
Confirm the finished opening and headroom for the drum. Check wind region requirements and plan power if you’re adding an opener.
- Measure accurately: width, squareness, headroom.
- Assess wind: may need wind‑locked.
- Decide motor vs manual: check delivery and lead times.
3. Wind-locked and wind-strong roller doors
On exposed sites, standard roller doors can struggle; wind‑locked and wind‑strong models add retention and stiffness to resist high‑wind loads.
What it is
Wind‑locked doors use side‑retention hardware in heavy‑duty tracks; wind‑strong doors use beefed‑up curtain components for extra strength.
When to choose this
Choose them for high‑wind regions, coastal/exposed sheds or very wide openings where a standard door may de‑track.
Typical costs in Australia
They cost more than standard roller doors; as a guide, basic doors start ~$3,000 and very wide spans can reach tens of thousands.
Buying tips and watch-outs
Get the wind spec in writing and match the door to the shed’s engineering.
- Confirm rating: supplier to state the certified wind rating for your site.
- Opener & structure: ensure motor, tracks, fixings and headroom suit heavier hardware.
4. Sectional garage doors for sheds
If you prefer a clean, modern look, sectional shed doors are a strong alternative to rollers. They suit DIY automation.
What it is
A panel‑lift door of hinged sections that travel up and back on ceiling tracks. DoorSupply offers Australian‑made custom sizes in Bluescope COLORBOND steel.
When to choose this
Choose sectional doors when looks matter or you want to match a home garage. Overhead operation also frees driveway space.
Typical costs in Australia
Pricing is quote‑based and varies by opening size, panel profile and automation. Ask for a made‑to‑measure price with delivery.
Buying tips and watch-outs
Check space and structure before you order.
- Measure clearance: headroom and backroom for tracks and the opener.
- Confirm wind/structure: check exposure and support requirements with the supplier.
5. Sliding steel shed doors
Sliding steel shed doors shine when you want a wide, simple opening and low maintenance. They travel along the wall on tracks, take the odd knock in stride, but won’t seal or motorise as well as roller doors.
What it is
A horizontal door that slides on a rail/track beside the opening. You can use double or triple tracks, and add outriggers to open spans as wide as the shed.
When to choose this
Choose sliding doors for farm machinery sheds and aircraft hangars where large clear openings and easy repairs matter. They’re also handy if you’re adding doors after the shed is built.
Typical costs in Australia
A basic sliding door can start around $3,000 and reach about $20,000 depending on span, number of bays and double vs triple track.
Buying tips and watch-outs
Plan space and sealing expectations before you order.
- Allow wall clearance: Match wall space to door travel, or specify outriggers for full-width openings.
- Know the trade-offs: Lower sealing and harder to motorise than roller doors.
- Pick track count early: Double vs triple affects cost, opening width and hardware.
6. Double hinged steel doors
For wide openings without roller hardware, double hinged steel shed doors give clear, secure access and straightforward maintenance.
What it is
A matched pair of steel leaves in one pre‑hung frame that swing open together or individually. Quality sets offer up to 180° opening on stainless hinges with a robust 4‑sided jamb for strength and sealing.
When to choose this
Use them for machinery, pallets and large items when a roller door isn’t required. Popular on workshops and farm sheds needing wide access with simple, tough hardware.
Typical costs in Australia
Quote‑based and typically more than a single PA door. Pricing varies by width, wind rating, hardware (locks, flush bolts) and sealing.
Buying tips and watch-outs
A few checks up front will save headaches later. Confirm how the pair will operate and seal, and whether the frame suits your structure. Then lock in the spec below.
- Define operation: active leaf, swing direction and slab/floor clearances.
- Verify wind spec: ask for certified compliance to AS/NZS 1170.2/AS 4055.
- Secure and weatherproof: specify pre‑hung frame, meeting‑stile seals and top/bottom flush bolts.
7. Tilt panel doors
Tilt panel doors swing out and up as a single leaf to clear the opening, delivering a clean, full-width gable with no tracks inside. They’re a niche choice for sheds that need an extra-wide, unobstructed entrance for large aircraft or machinery.
What it is
A spring‑balanced panel; larger doors may use hydraulic assist.
When to choose this
For very wide, unobstructed access—common in aircraft hangars or big machinery sheds.
Typical costs in Australia
With engineering, expect roughly $10,000–$100,000 depending on span and spec.
Buying tips and watch-outs
Confirm structural engineering, swing‑out clearance, wind rating and sill sealing/drainage.
8. Barn-style sliding doors
Barn‑style sliding shed doors add rustic appeal for rural sheds and stables. They run on top‑mounted rollers, need no swing clearance, and are specialised.
What it is
A single or pair of leaves on an overhead track, sliding flat along the wall.
When to choose this
Best for equestrian sheds and stables where aesthetics and horse safety trump security.
Typical costs in Australia
Quote‑based; pricing varies by size, cladding and hardware.
Buying tips and watch-outs
Confirm the basics first.
- Security: Not recommended where security is a priority.
- Wall space: Allow wall space for door travel.
- Specialist supplier: Choose a supplier experienced in barn‑door hardware.
9. Timber framed hinged doors (DIY)
A DIY timber‑framed hinged shed door suits odd sizes and fast builds using off‑the‑shelf materials. It’s budget‑friendly upfront, but needs good weatherproofing and more upkeep than a pre‑hung steel PA door.
What it is
A timber frame, sheet‑clad, hung on hinges to a jamb.
When to choose this
Use for low‑cost, custom sizes and simple outbuildings.
Typical costs in Australia
Material‑only; price up timber, cladding, hinges, lockset, seals and paint.
Buying tips and watch-outs
Focus on durability and weatherproofing.
- Use treated timber and exterior cladding: seal all edges.
- Galvanised/stainless hardware + proper seals: hinges, screws, threshold/drip sill.
10. Aluminium and glass sliding doors
After daylight and a ‘front door’ feel? Aluminium and glass sliders turn sheds into studios with smooth access and clean lines—great when you want visibility without swing clearance.
What it is
An aluminium‑framed sliding patio door with glazed panels that slide in their own frame; often with matching flyscreens.
When to choose this
Pick this for hobby rooms, studios or offices when daylight and easy foot traffic matter more than machinery.
Typical costs in Australia
Quote‑based; varies by size, glazing, colour, locks and screens, plus any retrofit framing or threshold works.
Buying tips and watch-outs
Plan for weather, security and a flush, safe threshold.
- Detail sill flashing and drainage correctly.
- Specify safety glazing and quality locks.
- Consider a security screen for added protection.
11. Security screen personal access doors
Security screen PA doors let you ventilate while adding a light deterrent. They complement your main shed door for everyday use.
What it is
A hinged mesh screen fitted with your PA door on a separate frame to allow airflow with the solid door open.
When to choose this
Use it when you want airflow and insect control without leaving the shed open to casual access.
Typical costs in Australia
Quote‑based; varies by size, frame finish and hardware.
Buying tips and watch-outs
Confirm compatibility with your PA door.
- Handing/clearance: ensure doors don’t clash.
- Coastal durability: choose corrosion‑resistant hardware.
- Security: treat as a layer, not the primary door.
12. Replacement and kit shed doors
When shed doors are tired or leaking, replacement and kit options let you upgrade fast without redesign—ideal for DIY installs and regional deliveries.
What it is
Pre‑hung steel PA door kits (often face‑fix), plus replacement packages for larger doors. Look for stainless hinges, 4‑sided jambs and reversible handing to simplify install.
When to choose this
Use kits for quick swaps, odd sizes or remote sites, especially when a PA door upgrade solves rattles, leaks and daily access woes.
Typical costs in Australia
Costs are quote‑based. PA kits are usually budget‑friendly; big‑door replacements track with the roller/slider prices above. Some suppliers, like DoorSupply, include free metro delivery.
Buying tips and watch-outs
Double‑check the basics before you click buy.
- Measure opening, squareness, wall type and fixings.
- Confirm handing/swing, sill clearance and drainage.
- Ask for wind rating (AS/NZS 1170.2/AS 4055).
The bottom line on shed doors
Match the door to how you use the shed: PA for daily foot traffic; roller or sectional for regular vehicle entry; sliding or double‑hinged for big, simple openings; tilt for ultra‑wide spans; aluminium/glass and screens for comfort; replacement kits for fast upgrades. Then balance budget against wind rating, sealing, and ease of DIY install.
- Measure: measure square; confirm finished opening.
- Wind: check wind region and certification.
- Space & power: verify headroom/backroom or wall travel and power.
Ready to spec and price your shed door? Compare Australian‑made custom roller and sectional doors, PA doors and openers—DIY‑friendly, Australia‑wide—at DoorSupply. Get a quote to lock in colour, size and timing.