How Much Does A Garage Door Cost In Australia (2025 Prices)

How Much Does A Garage Door Cost In Australia (2025 Prices)

How Much Does A Garage Door Cost In Australia (2025 Prices)

“Garage door cost” is simply what you’ll pay to get a door that fits and works the way you want — the door itself, an opener with remotes if you go automatic, the labour to fit it, and any extras like insulation, windows, custom colours, wind or cyclone upgrades and a power point for the motor. Prices shift with door type (roller, sectional or tilt), size (single vs double) and whether you buy supply-only or a supplied-and-installed package.

This 2025 guide puts real Australian figures on the table so you can set a budget and push back on padded quotes. We’ll cover price ranges for single and double doors, supply-only vs turnkey installs, when each door style makes sense, what drives costs up, what installation should include, regional and wind-rating differences, DIY savings, automation upgrades, ongoing running costs, quoting tips and lead times. First, the numbers at a glance.

2025 garage door prices at a glance (single vs double, supply-only vs supplied & installed)

If you’re asking “how much does a garage door cost” in 2025, here are realistic Australian ranges you can sanity‑check against quotes. “Supply-only” means the door and hardware delivered (DIY or your own installer). “Supplied & installed” includes a standard motor package (two remotes) and fitting. All figures are typical national averages, incl. GST.

Door style Single (Supply-only) Single (Supplied & installed) Double (Supply-only) Double (Supplied & installed)
Roller (steel) $775 – $2,000 $1,200 – $3,000 $1,400 – $2,800 $2,000 – $4,200
Sectional / panel-lift $1,290 – $3,000 $1,800 – $3,800 $2,100 – $4,500 $3,200 – $6,000
Tilt (one-piece) $1,600 – $3,000 $2,200 – $4,000 $2,400 – $4,000 $3,500 – $6,200
Custom / designer — $4,000 – $9,000+ — $5,500 – $12,000+

Expect the upper brackets for premium finishes, insulation, oversized openings, higher wind ratings or quiet high‑torque motors. Brand price lists may quote “door-only” as a separate line; openers and installation add to those figures.

Roller doors: what they cost in 2025 and when they make sense

If you’re asking “how much does a garage door cost” on a tight budget, roller doors are still the value pick. In 2025, expect $1,200–$3,000 supplied and installed for a powered single, or $2,000–$4,200 for a double. Supply‑only runs roughly $775–$2,000 (single) and $1,400–$2,800 (double). Brand‑premium “door‑only” figures can sit higher at about $2,000–$3,500 (single) and $4,000–$6,500 (double). Wind‑locked/semi‑commercial models for coastal or cyclone areas typically start around $3,500 installed. Choosing a manual roller instead of automatic can save about $300.

  • Best for: sheds, carports and simple single garages
  • Best for: budget-led projects needing a durable, low‑maintenance door
  • Best for: imperfect openings where a forgiving fit helps
  • Consider: wind‑locked upgrades in higher wind/cyclone zones (adds cost)

Sectional (panel-lift) doors: costs, finishes and design options

If street appeal matters, sectional doors are the sweet spot: modern looks, smooth travel on overhead tracks and loads of customisation. In 2025, a typical sectional costs $1,800–$3,800 supplied and installed for a single, or $3,200–$6,000 for a double. Supply‑only sits around $1,290–$3,000 (single) and $2,100–$4,500 (double). Some brand guides quote door‑only at $2,500–$4,000 (single) and $4,000–$6,500 (double), with sectional openers at about $850–$1,300, so check what’s included when you compare how much a garage door costs.

Sectionals shine because you can dial in the finish, insulation and hardware. Here’s what typically moves the price and by how much:

  • Insulation backing: from ~$350 (single) or ~$700–$1,200 (double)
  • Windows/glazing: usually $350–$800
  • Custom colours: add roughly $120–$450
  • Timber‑look emboss/woodgrain: add about $450–$750 (double)
  • Real cedar or aluminium battens: add $2,000+ or $1,400–$2,500 (double)
  • Quiet belt/shaft‑drive motor or high‑cycle springs: add $200–$550
  • Oversize height/width (springs upgrade): add $250–$400

For bedrooms above the garage, a quiet 800–1,000 N belt‑drive opener is worth it; for hot or noisy streets, insulated panels can trim garage temps and road noise noticeably while lifting the door’s feel and durability.

Tilt doors: prices and where they fit best

Tilt doors are a single solid panel that pivots outwards before sliding up under the ceiling. In 2025, expect $2,200–$4,000 supplied and installed for a single, and $3,500–$6,200 for a double. Supply‑only sits around $1,600–$3,000 (single) and $2,400–$4,000 (double). With fewer manufacturers they price a touch higher, and the larger moving mass usually needs stronger springs plus a mid‑range shaft‑drive or high‑torque opener—budget $550–$900 supply for an 800–1,000 N unit. Always check driveway clearance for the outward swing.

  • Best for: garages with minimal headroom where sectionals won’t fit neatly
  • Best for: carports and retrofits replacing older one‑piece panels
  • Best for: clean, single‑panel aesthetics on modern facades
  • Consider: the door’s swing arc so vehicles and pedestrians clear the leaf safely

Custom and designer doors: what drives the premium

If kerb appeal is the brief, custom and designer doors (timber, aluminium battens/slats, glass or bespoke Colorbond panels) sit in a higher bracket because materials, fabrication and hardware all scale up. In 2025, a fully installed single typically runs $4,000–$9,000+, and doubles $5,500–$12,000+. When you compare “how much does a garage door cost” quotes, check what’s bundled, because finish upgrades often require stronger springs and quieter, higher‑torque motors.

  • Material choice: timber‑look powder‑coat (+$120–$450), woodgrain emboss (+$450–$750 on a double), real cedar (+$2,000+), aluminium battens (+$1,400–$2,500).
  • Design features: windows/glazing (+$350–$800), flush/architectural panels (towards the top of the range).
  • Thermal/acoustic: insulated panels (+$700–$1,200 on a double).
  • Mechanics: quiet belt/shaft‑drive or 1,000 N motors and high‑cycle springs (+$200–$550), oversize spring upgrades (+$250–$400).
  • Location/compliance: wind/cyclone ratings add further cost and influence hardware selection.

Premiums buy better aesthetics, quieter operation and longer service intervals—worth it when the garage dominates the façade.

What affects your final price: the big cost drivers

Two quotes for “the same door” can be a grand apart because installers are pricing different specs. Think of your garage door cost as a stack of dials—size, material, wind rating, automation, and labour—each nudging the total up or down. Use this quick checklist to see where your quote sits and why.

  • Opening size & headroom: Every extra 100 mm of roller‑door height can add about $180. Oversize sectionals often need upgraded torsion springs (+$250–$400) and sometimes a higher‑torque motor (+$120–$250).
  • Materials & finish: Standard Colorbond is baseline; custom colour (+$120–$450), timber‑look emboss (+$450–$750 on a double), real cedar (+$2,000+) or aluminium battens (+$1,400–$2,500) increase supply cost.
  • Insulation & glazing: Add from ~$350 (single) or $700–$1,200 (double) for insulated panels; windows typically add $350–$800.
  • Wind rating/compliance: Wind‑locked upgrades add ~$400–$700; cyclone ratings can lift totals by 15–25%.
  • Motor & springs spec: Stepping up to quiet 800–1,000 N or high‑cycle springs commonly adds $200–$550; roughly $120 per extra 250 N of lift.
  • Site & location costs: New GPO $150–$300; old‑door removal $100–$250; freight outside capitals $150–$450; regional labour often +10–20% or +$80–$120 for complex installs.

Automation: opener types, smart add-ons and upgrade costs

Going automatic changes daily convenience, noise levels and total garage door cost. Pick the opener to match your door’s weight, size and usage: quiet belt drives suit bedrooms overhead; direct/shaft-drive and higher torque suit insulated, timber or oversize panels.

  • Entry-level chain-drive (≈550 N): $330–$480 supply-only; $160–$300 to fit if a ceiling GPO exists. Solid for roller doors, sheds and budget installs.
  • Mid–premium belt/shaft-drive (800–1,000 N): $550–$900 supply-only. Whisper‑quiet, soft start/stop, longer 7–10 yr warranties—best for sectionals and heavier doors.
  • Brand “door-only” add-ons: Line‑item openers commonly price at $750–$1,500 (roller) or $850–$1,300 (sectional) when not bundled in install packages.
  • Smart control: Plug‑in Wi‑Fi bridge $80–$150; third‑party retrofit $70–$120. Many premium motors include Wi‑Fi onboard.
  • Safety & convenience: Photo‑eye beams $80–$120 (often mandatory on new sectional installs in NSW/VIC); keypad $90–$180; battery back‑up $120–$250.

Rule of thumb: each extra 250 N of lift adds roughly ~$120. Buy the capacity you need—no more, no less.

Installation and labour: what’s normally included (and what isn’t)

A “supplied & installed” garage door should come with clear labour inclusions so you’re not stung on install day. As a guide, typical install labour runs about $300–$600 for roller doors and $450–$800 for sectional or tilt doors. That usually covers 2–4 hours on site to mount tracks, balance/tension the door, fit and commission the opener, program two remotes and tidy up packaging.

  • Typically included: levelling/plumbing of guides and tracks, spring tensioning, safety‑reverse test and force calibration, motor mounting, programming of handsets, basic weather seal trim, metro call‑out and clean‑up.
  • Common extras (ask if they’re in or out): new ceiling GPO ($150–$300), photo‑eye safety beams where required ($80–$120), removal/disposal of the old door ($100–$250), regional freight ($150–$450), oversize/raked ceilings adding an extra hour (~$80–$120), any structural carpentry, jamb repairs, lintels, painting or plaster patching.
  • Aftercare: many reputable installers include one free adjustment visit within 30 days—confirm this on the quote.

Spell out inclusions and exclusions in writing before you approve the job.

Regional differences, wind ratings and cyclone compliance

Where you live changes how much a garage door costs due to labour, freight and wind compliance. Big eastern capitals tend to be cheapest; remote or cyclone‑exposed postcodes pay more for travel, delivery and upgraded hardware. Your installer should nominate the wind category your postcode requires (often N3/N4 in windy areas or C2/C3 in cyclone regions) and price the correct guides, clips and springs.

  • Labour uplift: ~+10% in Adelaide, Canberra and Hobart; ~+15–20% in Darwin, Broome and Alice Springs, with common travel levies of $100–$200.
  • Freight/delivery: Bulky sectional panels to regional WA/FNQ often add $150–$450.
  • Wind upgrades: Wind‑locked roller doors to N3/N4 typically add $400–$700; cyclone‑rated C2/C3 packages can lift totals by roughly 15–25%.

Ask quotes to state the included wind category, delivery and any travel fees in writing.

DIY supply-only vs turnkey install: which is cheaper?

If you’re handy or happy to book your own tradies, supply‑only can cut the total by 10–25%. You’ll pay the door price (e.g., single roller $775–$2,000; single sectional $1,290–$3,000), then add install labour ($300–$600 roller; $450–$800 sectional/tilt), any new GPO ($150–$300) and old‑door removal ($100–$250). Compare that with turnkey installed packages (e.g., single roller $1,200–$3,000; single sectional $1,800–$3,800) that wrap labour, commissioning and remotes into one line.

  • DIY/supply‑only suits: confident measurers, simple openings, metro areas with free/cheap delivery.
  • Turnkey suits: time‑poor owners wanting one warranty and a clean handover.
  • Watch‑outs: regional freight ($150–$450), wind‑rating inclusions, and errors that can void both motor and door warranties. One mis‑measurement erases any saving.

Converting an existing manual door to automatic: typical costs

Motorising a sound, well‑balanced roller, sectional or tilt door is usually far cheaper than replacement. In 2025 most single‑door conversions sit at $600–$1,100 all‑in; heavy timber or over‑height panels that need a 1,000 N opener land near the top. Installers should test balance first; spring re‑tensioning adds $100–$150.

  • Motor kit: entry chain/550 N $330–$480; quiet 800–1,000 N $550–$900
  • Labour to fit/commission: $160–$300 (with an existing ceiling GPO)
  • Sundry brackets/fixings: ~ $50
  • New GPO (if needed): $150–$300
  • Safety beams: $80–$120 (mandatory on new sectional installs in NSW/VIC)
  • Optional add‑ons: keypad $90–$180; battery back‑up $120–$250; Wi‑Fi bridge $70–$150

Ongoing costs: servicing, repairs and energy use

After the upfront garage door cost, plan a small annual allowance to keep things smooth, quiet and safe. Most doors should be serviced every 12–18 months; expect $120–$180 for roller doors and $150–$220 for sectional/tilt. A proper service covers spring tension checks, lubrication, safety‑reverse/force calibration and handset reprogramming. Skipping services can shorten opener life and risk warranty issues.

  • Common repairs (parts, supply-only): springs $180–$350; bottom seal $40–$90; replacement remote $40–$70; logic board/drive belt $90–$180; new motor after 10–15 years $350–$900. Labour call‑outs typically $120–$200.
  • Energy use: modern DC motors draw ~150–300 W in motion and <6 W standby; for four cycles daily, power costs are usually under ~$15/year (at 30 c/kWh).
  • Backup & consumables: battery back‑up cells ~ $90 every 3–5 years; remote batteries as needed.
  • Budget tip: set aside about ~$150 per year on average for servicing and consumables to protect your investment.

How to get accurate quotes: measurements, inclusions and red flags

Accurate quotes start with accurate site details. Before you ask “how much does a garage door cost,” measure properly, share clear photos, and insist on written inclusions. That way, every installer is pricing the same scope, wind rating and motor spec, and you can compare apples with apples.

  • Measure once, quote once: clear opening width/height; reveal-to-reveal; headroom (lintel to ceiling); sideroom (jambs to walls/tracks); backroom (ceiling depth); slab level; note obstructions (pipes, meters). Add photos of inside/outside and note postcode for wind category.
  • Ask for written inclusions: door model/profile/colour; wind rating (e.g., N3/N4 or cyclone class); opener brand/model and lift force (N) with two remotes; safety beams (sectionals in NSW/VIC); keypad/battery back-up if needed; removal/disposal of old door; electrical (new GPO or BYO); freight/travel; final commissioning and clean-up; warranty terms (door, motor, labour) and a 30‑day adjustment visit.
  • Clarify site extras: oversize/spring upgrades; insulation/windows; raked ceilings or steelwork; masonry/trim repairs; painting/plaster not included.
  • Red flags: “door-only” quotes presented as full installs; no stated wind category; vague “from” pricing with no site measure; missing motor model/torque; delivery/travel excluded to be added later; unusually low prices vs ranges above; big deposits without timelines; no ABN/insurance or written warranty.

Lead times and delivery in 2025

Made‑to‑measure garage doors aren’t off‑the‑shelf, so your project timeline is production plus freight. In 2025, typical manufacturing is running at about three weeks, then delivery to you or a local depot. In metro areas that usually means roughly four weeks end‑to‑end; regional and remote postcodes take longer. Plan ahead if you’re syncing with other trades.

  • Production: allow ~3 weeks for a custom door to be built.
  • Delivery windows: add 5–7 working days to NSW, Tasmania, Brisbane, Adelaide and Perth; around 10 days to Far North QLD and the NT.
  • Delivery method: many suppliers ship to the nearest branch or depot for collection; home delivery can attract surcharges or be harder to arrange.
  • Pick‑up options: metro warehouse/depot collection is often available and faster than booking residential delivery.
  • Pro tip: busy seasons (spring renos, storm rebuilds) can extend lead times—lock orders in early and confirm your delivery window in writing.

Key takeaways and next steps

By now you’ve got a realistic 2025 budget: roughly $1,200–$4,500 installed for a single and $2,400–$6,800 for a double, with roller doors the value pick, sectionals the kerb‑appeal favourite, tilt for low headroom, and custom when design leads. Your final price turns on size, finish, wind rating, opener spec and labour; installs typically add $300–$800, and servicing averages about $150 per year.

  • Measure accurately and get like‑for‑like written inclusions (door model, wind category, opener torque, freight, disposal, electrical).
  • Decide DIY supply‑only vs turnkey based on your skills, site and warranty preference.
  • Plan for lead times: ~3 weeks production + 5–10 days delivery.
  • Add only upgrades you’ll use (insulation, quiet motor, Wi‑Fi, beams).

Ready for firm numbers? Get an instant supply‑only price or expert help at DoorSupply.